福建REFRIGERATOR COMPRESSOR ACCESSORIES

According to the statistics of the proportion of powder metallurgy used in 2017, auto parts accounted for 60.7% of the total sales, followed by household electrical appliances, electric tools, motorcycle parts, and agricultural machinery parts, accounting for 15.3%, 6.4%, 4.5%, 4.5%, and 1.9% of the total sales respectively. Household electrical appliances are also the main service objects of domestic powder metallurgy manufacturers. Lianyungang Dongmu has basically cooperated with domestic large-scale compressor manufacturers to produce refrigeration compressor parts, Refrigeration compressor is mainly used in refrigerators, and its major components include piston, connecting rod, valve plate, bottom valve, etc.

The refrigeration compressor is the "heart" of the refrigeration system. It absorbs the refrigerant vapor from the evaporator, increases the pressure, and exhausts it to the condenser, so that the refrigerant circulates in the system. The quality of its parts is very important. Every small piston and connecting rod participates in the core work.

Electrical products are a big market for powder metallurgy structural parts, but these parts are not only complex in shape, but also require high temperature resistance, high pressure resistance, rust prevention, air tightness and good machinability. It is also very beneficial for powder metallurgy manufacturers to further improve the level of process equipment and technical design.

The manufacturing process of compressor parts is not complicated, but it is not easy to be meticulous:

1. Raw material inspection: the first is the inspection of raw materials, to detect the fluidity, chemical composition, loose packing density, etc. of raw materials.

2. Mixing: mixing proportion, chemical composition, mixing time and speed of main powders are required.

3. Molding: select the appropriate tonnage of press, the appropriate pressing speed and the height of powder filling. The molding density, height, appearance and size of the molded products need to be tested.

4. Sintering: when using mesh belt furnace for sintering, attention should be paid to the sintering temperature, sintering speed, gas flow, etc. The sintered products need to be tested for appearance, size and hardness.

5. Finishing: valve plate products need finishing treatment. The tonnage of the finishing press is higher than that of the forming press. Pay attention to the finishing speed and pressure. After finishing, check whether the appearance and size meet the standard.